• 10KW 30-40PCS / Min Zenzekelayo Face Vuvu Ukwenza Machine

10KW 30-40PCS / Min Zenzekelayo Face Vuvu Ukwenza Machine


  • Ixabiso FOB: I-US $ 0.5 - 9,999 / isiQwengana
  • Min.Order Ubungakanani: 1 iseti
  • Amandla okubonelela: 10000 Piece / ngenyanga nganye
  • Ukuchaneka: + -1%
  • I-Voltage: 220V
  • Ngentando: Entsha
  • ubukhulu: 1050 (ubude) * 150 (ububanzi) * 180 (ubude)
  • Ubunzima: ubunzima ≤1500KG Ground umthwalo 350KG / ㎡
  • Iinkcukacha Product

    FAQ

    Iimpawu zemveliso

    Ulawulo lwePLC oluzenzekelayo lobuso bemaski Ukwenza umatshini  

     

    Lo ngumatshini wesigqubuthelo esizenzekelayo (umgca wemveliso enye, umgca omnye wemveliso), kubandakanya ukuhanjiswa kwezinto ezizenzekelayo, ukuthuthwa okuzenzekelayo, ukusika umtya wempumlo, ukugoba imaski, ukusonga, ukuwelda kwe-ultrasonic, ukusika, ukuqinisa iweld band kunye nenye inkqubo epheleleyo oomatshini abazihambelayo.

    Lo matshini wemaski ngokuqinisekileyo uzenzekelayo, nokuba umntu omnye unokusebenzisa iiseti zomatshini wesigqubuthelo se-2-3.

     

    Isigqumathelo sinokunxiba ngokukhululekileyo, akukho xinzelelo, ukusebenza okuhle kokucoca ulunge, kufanelekile ukumila kobuso bomntu, kwaye kunokusetyenziswa kunyango, i-elektroniki, imigodi, ulwakhiwo kunye namanye amashishini.

     

    Lo matshini wamkela i-PLC, uthinte ulawulo lwescreen, ibhanti yokuhambisa ephambili isebenzisa inqanaba elinye lokuhambisa iimoto, ukunyathela ukuguqulwa kwemoto, ukuhambisa ngokuthe ngqo, ulawulo oluzinzileyo kunye nesantya esiguqukayo.

     

    Iimpawu Product

    •  Isitali, isivuno esiphezulu, jikelele
    •  Ingatshintshwa ukubumba ukuvelisa iinkcukacha ezahlukeneyo kunye neemilo imaski umzimba imilo
    •  Uzinzo olulungileyo
    • Sebenzisa itekhnoloji ye-welding ye-ultrasonic ukucheba i-pattems entle necocekileyo, indawo ye-welding ihanjiswa kakuhle, ukungunda kunye ne-wave ye-ultrasonic banexesha elide lokuphila.
    • Kulula ukusebenza, iqondo eliphezulu lokuzenzekelayo
    •  Isakhiwo seAluminiyam samkelwa, esihle kwaye siqinile ngaphandle komhlwa.
    •  IComputer PLC (Mitsubishi PLC) ulawulo lwenkqubo, uzinzo oluphezulu, isantya sokusilela esiphantsi kunye nengxolo ephantsi.
    • I-Servo motor engeniswe ngaphandle isuka eTaiwan, i-stepper motor drive, ukuchaneka okuphezulu.
    • Ukufunyanwa kweefoto ezibonakalayo zokwenza izinto ukuthintela iimpazamo kunye nokunciphisa inkunkuma.
    • Umatshini wamkela iipleyi kunye neenyawo ezizinzileyo, ezifanelekileyo kunye nokukhawuleza ukuhamba, ukulungiswa ngamandla, kwaye akushukumi.

     

    Iparameters technical

     

    •  Ubungakanani bomatshini bude, bubanzi kwaye buphakamileyo: ubungakanani bomatshini uphela yenye ngokwe-1050cm * 150cm * 180cm eyiyo
    • Qaphela: AC220V 50-60HZ
    •  Imveliso yokusebenza: iziqwenga ezingama-30-40 / min
    • Amandla: 10KW

    Imput izinto ezingafunekiyo, ukondla okuzenzekelayo, ukusika umgca wempumlo / ukondla, ukugoba i-welding, ukusonga indawo, ukwenza i-welding, ukubonwa kwe-photoelectric, ukusika okuzenzekelayo, ukugqitywa kwemveliso egqityiweyo, ukufumana ukulungiswa kwetreyi, ukuzenzekelayo okupheleleyo

    Hayi. Umba Ipharamitha
    1 ubungakanani 1050 (ubude) * 150 (ububanzi) * 180 (ubude)
    2 Ubunzima ubunzima ≤1500KG Ground umthwalo 350KG / ㎡
    3 Umbala Umbala weShedyuli yentsimbi eshushu engwevu 1C, umbala wokuqala weprofayile yealuminium
    4 Ukusebenza kombane 220VAC ± 5% 50HZ ukhuseleko kumhlaba ilinganiswe amandla ≤10KW (kuquka welding umatshini)
    5 Umoya oxineneyo 0.4-0.6MP (amanzi acocekileyo emva kokuntywila, akukho oli, ukuhluza, ukuzinzisa uxinzelelo), ukusetyenziswa kokuhamba kwenqanaba li malunga ne-300L / min
    6 Ukusebenza kwemveliso I-30-40PCS / min (ngokwempembelelo yokulungisa ingxaki)
    7 Umgangatho wemfundo 99% (ngaphandle kwezinto zoqobo kunye nokusebenza kwabantu)
    8 Izixhobo eziphambili Isilinda: Isikhokelo sikaloliwe se-AirTAC Screw: HIWIN / TBI PLC: IMitsubishi okanye iXinjie
    9 Indawo yokuSebenza Indawo yokusebenzela ngokubanzi yamkelekile (akukho vumba lonakalisayo, akukho luthuli)

  • Egqithileyo
  • Okulandelayo:

  • Q1: Ngaba ungumzi-mveliso okanye inkampani yorhwebo?

    I-A1: Sivelisa oomatshini bokupakisha kwaye sifezekisa i-OEM egqibeleleyo kunye nenkonzo yasemva kwentengiso.

    I-Q2: Ndingazi njani ukuba umatshini wakho usebenza kakuhle?

    I-A2: Ngaphambi kokuhanjiswa, siya kuvavanya imeko yokusebenza komatshini kuwe.

  • Bhala umyalezo wakho apha uze uyithumele kuthi